Ready-to-use, very economical, color-intensive textile dye with fast dyeing results for all natural fibers and synthetic fabrics. Easy to dose directly from the bottle for hand or washing machine dyeing. The paints can be mixed together. Suitable for techniques such as Cold-Dye/Vintage Effect, Tie-Dye, Shibori, or Dip-Dye in intense colors (undiluted) or pastel colors (diluted with water). Washable up to 90 degrees without bleeding (washing out excess dye). No color fixer required. Fixation by ironing is sufficient.
water-based, non-hazardous
soft feel
for white natural fibers and synthetic fabrics
washable up to 90 degrees without bleeding
ready to use and easy to dose
no fixative required
dilutable with water
paints can be mixed together
Wash fabrics WITHOUT softener before designing. Shake well before use! Tip: Wear protective gloves.
Place the dry piece of textile in the drum. Add 90 ml for approximately 230g of fabric – approx. 2 size M t-shirts – to the detergent compartment (less intense color). For temperature setting, see the care label. In rare cases, there may be slight discoloration of plastic/rubber parts, which can be removed with benzine.
Mix 2 ml Textile dye for light coloring, 90 ml textile dye for intensive coloring, in 1 liter of cold water. Place the dry piece of textile (e.g., 1 t-shirt, size M) into the dye bath, knead briefly, wring out, and let it hang dry.
Tie the piece of textile tightly with the string for a tie-dye look. Dip the piece of textile in water and wring it out well. Place the textile on the drying rack and apply the textile dye directly from the bottle to the free areas up to just in front of the ties. Remove the ties and let the textile dry flat.
No rinsing necessary after dyeing. Iron-fix after drying (highest possible temperature see textile care label). Wash again for a soft touch.